Details:
This seat is based off the 2008-2012 model. It will interchange with the 2008-2022. It will be slightly longer than the 2013 and up. Check dimensions below.
This Seat Concepts seat kit includes new injection molded comfort foam, hand sewn cover with carbon fiber side panels and a no slip top. Install this on your OEM pan. This seat is narrow on the top from front to back for easier movement in the back country. Choose from two accent band colors. This seat is 2" Lower than stock.
Dimensions:
Length - 29" overall
Width - 5.75"
Height - 2" Lower than stock
Weight: 6.7lbs
"Seat support may need to be re-positioned to align with mounting holes."
The seats in this column below will be similar in length as your stock seat but overall shape is different. Not a stock replacement.
Fitment:
2008 600 RMK 144 / 155
2008 700 RMK 144 / 155 / 163
2008 800 Dragon RMK 155 / 163
2009 600 Dragon SP / ES
2009 600 RMK Shift 144 / 155
2009 600 Switchback / Dragon
2009 700 RMK 155 ES
2009 800 Assault RMK 146
2009 800 Dragon SP / ES
2009 800 IQ / ES
2009 800 RMK Shift 144
2009 800 RMK / ES
2009 800 Dragon RMK 155 / 163 / ES
2009 800 Switchback Dragon
2010 550 IQ Shift ES
2010 600 Dragon Switchback
2010 600 IQ Shift ES
2010 600 RMK Shift 144 / 155 / ES
2010 600 Switchback ES LX
2010 700 RMK 155
2010 800 Assault RMK
2010 800 Dragon IQ / ES
2010 800 IQ / ES
2010 800 RMK 144 / 155 / ES
2010 800 Dragon Switchback ES
2010 800 Dragon RMK 155 / 163
2010 800 Switchback ES
2011 550 IQ Shift ES
2011 550 Shift 136 ES
2011 600 IQ Shift ES
2011 600 RMK Shift 144 / 155 / ES
2011 600 Switchback ES
2011 600 Shift 136 ES
2011 800 Assault RMK 155
2011 800 PRO RMK 155 / 163 / ES
2011 800 RMK 155 ES
2011 800 Switchback Assault
2012 550 IQ Shift ES
2012 550 Shift 136 ES
2012 600 IQ Shift ES
2012 600 PRO RMK 155
2012 600 RMK 144 ES
2012 800 RMK Assault 155
2012 800 PRO RMK 155 / 163
2012 800 RMK 155 ES
2012 800 Switchback Assault
2013 550 IQ Shift ES
2013 550 Shift 136 ES
2013 600 Indy SP / ES
2013 600 RMK 144
2013 800 Switchback Assault
2014 550 Indy 144 ES
2014 600 Indy SP / ES
2014 600 RMK 144
2014 800 Indy SP ES
2015 550 Indy 144 ES
2015 600 Indy SP
2015 600 Switchback Assault
2015 800 Indy SP
2015 800 Switchback Assault
2016 550 Indy 144 ES
2016 550 Indy Voyager
2016 600 Indy SP / LTD
2016 600 Switchback Assault
2016 800 Switchback Assault
2017 550 Indy 144 ES - Non Adventure
2017 550 Indy Voyager 155 / 144
2017 600 Indy SP
2018 550 Indy 144 ES
2018 550 Voyager 155
2018 600 Indy SP
2019 550 Voyager 155
This seat will fit the following models but will be longer in length and a different shape. Be sure to look at dimensions and pictures above.
Fitment:
2022 550 Indy Evo 121
2022 550 RMK Evo 144
2022 850 RMK Khaos 155 / 163 / 165
2022 850 RMK PRO 155 / 163 / 165
2021 550 Indy Evo 121 ES
2021 550 RMK Evo 144 ES
2021 600 Axys PRO RMK 155
2021 850 Axys PRO 155 / 163 / 165 / 174
2021 850 RMK Khaos 155 / 163 / 165
2020 550 Indy Evo ES
2020 600 Axys PRO RMK 155
2020 800 Axys PRO RMK 155 / 163 / 174
2020 800 Axys SKS 155 SC
2020 850 Axys PRO RMK 155 / 163 / 174
2020 850 Axyx SKS 155
2020 850 RMK Khaos 155
2019 550 Indy Evo ES
2019 600 Axys PRO RMK 155 ES
2019 800 Axys PRO RMK 155 / 163 / 174
2019 800 Axys SKS 155
2019 800 RMK Assault 155
2019 850 Axys PRO RMK 163 / 174
2019 850 Axyx SKS 155
2018 600 Axys PRO RMK 155
2018 800 Axys PRO RMK 155 / 163 / 174
2018 800 Axys SKS 155
2018 800 RMK Assault 155
2017 600 Axys PRO RMK 155
2017 800 Axys PRO RMK 155 / 163 / 174
2017 800 Axys PRO RMK LE 155
2017 800 RMK Assault 155
2017 800 Axys SKS 155
2016 600 Axys PRO RMK 155
2016 600 RMK 144 / 155
2016 800 Axys PRO RMK LE 155 / 163 / 174
2016 800 RMK 155
2016 800 RMK Assault 155
2016 800 Axys SKS 155
2015 600 PRO RMK LE 155
2015 600 RMK 144 / 155
2015 800 PRO RMK LE 155 / 163
2015 800 RMK 155 / 163
2015 800 RMK Assault 155
2014 600 PRO RMK 155
2014 600 RMK 155
2014 800 PRO RMK LE 155 / 163
2014 800 RMK LE 155 / 163
2014 800 RMK Assault
2013 600 PRO RMK 155
2013 600 RMK 155
2013 800 PRO RMK 155 / 163
2013 800 RMK 155 ES
2013 800 RMK Assault
"Photo may not represent exact material received."
Production Lead Time
Q: What is your current lead time?
A: Our current production lead time is approximately 4-6 weeks from the date of purchase.
Q: Will it be faster if I order a Foam & Cover Kit as opposed to the Complete Seat?
A: Unfortunately, not. With all orders being made in-house and by hand, manufacturing queues will always be a little lengthy. We try to always post current lead times on our website so be sure to click here for more information.
Materials
Q: What are the differences between the cover options?
A: The Carbon Fiber material refers to a vinyl material with imprinting, making it look like carbon fiber. This material provides minimal grip. The Semi-Grip material has a beaded texture and provides an intermediate level of grip. The Gripper material has a sandpaper texture and will provide a fairly aggressive level of grip.
Q: Are there color options for all the seat covers?
A: Not on all covers. Certain models have an option for a factory color combo but not all. There are no substitutes offered for any selections shown in the Cover Options drop-down menu.
Q: Are the covers waterproof?
A: All standard covers are made of water-resistant vinyl. The covers are not waterproof at the seams. If you ride in an environment where water is an issue, wrap the foam with a thin plastic before installing the cover. A sheet of thin plastic is provided with all kits where applicable. Water will still be present at the seams after rain till the cover dries inside and out. All complete seats are supplied with plastic already installed.
Q: Are Seat Concepts seat pans the same as an OEM pan?
A: Seat Concepts seat pans are designed to be replicas of the OEM pan however are not actual OEM or factory seat pans. On certain models, we have made durability improvements or changed the shape of the pan to allow for a greater foam thickness or to increase pan durability if an issue exists with the OEM pan.
Foam & Comfort
Q: Is the *LOW* seat as comfortable as a standard or tall seat?
A: To make a low seat, we have to remove some foam. In some cases, that affects comfort. Due to the thickness of the factory foam, sometimes we need to increase foam density on our low seats to prevent the rider from bottoming out on the pan in certain terrain. In all cases, there will be less foam than the stock height seat. In most cases, the low seat option is designed for people that really need the extra reach to the ground and understand that it may be a bit more firm than our standard or tall seat.
Q: Is a *TALL* seat more comfortable?
A: Not exactly… Tall seats are designed for our longer-legged riders. Some people have blurred the purpose of a tall seat by ordering tall seats and asking for a really soft foam. Our seat design and foam formulation offset the perceived value of a taller overly soft seat. The extra width of our 'comfort seats' combined with our proprietary foam should give you all the comfort you need at the right height. We do make tall seats for many of our offerings; however, we do not make them exceptionally soft. We can and do adjust the foam density for rider weights outside of our recommended weights (165-265lbs) or per customer request. If we make the foam softer or harder per customer request, this is now considered a custom foam and is not available for return.
Q: Are there different density foams available?
A: Generally, our standard foam density works well for most riders, but not every rider is the same.
Installation
Q: Can I send my seat in for installation?
A: We will happily install the foam and cover kit for a minimal fee ($25/seat). To keep downtime to a minimum, we recommend placing your order, then shipping us your stock pan closer to the end of the lead time. Make sure to add the Seat Installation option to your cart from the products page. This adds an installation fee and also lets us know that your seat will be on the way. Don't forget to include your order information in the box with your seat so we'll know who it belongs to. Also, be sure to send only the seat pan without the foam and cover.
Q: Can I install a Seat Concepts foam and cover kit myself?
A: Yes! Our kits are made to be do-it-yourself kits and are fairly easy to install. There are several quality install videos on our YouTube channel, and the seat kit comes with great instructions. We highly recommend purchasing this staple gun from Harbor Freight's Wide Crown pneumatic stapler. (Item number 68029) We recommend T-50 stainless steel staples that do not exceed ¼”. Our fit is very specific, if you have any fitment questions or difficulty, please contact us immediately. We are not liable for any damage that is caused by self-installation. This process is at your own risk.
Q: Should I take my seat to a local upholstery Shop?
A: We have had lots of customers take our kits to local upholstery shops, and most of the time they can complete the installation easily and correctly. The important question to ask any upholsterer is "have you installed motorcycle seats before?" If their answer is anything other than yes, or they start talking about altering our kit in any way, they are not the right people for the job. Please note that Seat Concepts takes no responsibility for the quality of services of third-party installers.
General
Q: What is the difference between a Complete Seat and a Foam & Cover Kit?
A: Foam & Cover Kits consist of a foam and a cover. This will need to be installed on an OEM seat pan. A Complete Seat comes fully assembled on a Seat Concepts pan, and is ready to ride.
Q: How do I clean my seat?
A: We recommend using a mild detergent/cleaning solution, warm water, and a soft scrub brush. The material itself is pretty water-resistant, but the seams are not sealed. Do not submerge or soak the seat. Do not put your seat in the dishwasher (yes, someone actually did that) also stay away from any harsh chemicals or solvents. To dry, simply leave the seat in the sun for a short while, do not use a heat gun, fire, microwave, or any sort of propane heater. **NOTE: Do not use a pressure washer to clean the seat!**
